Zestron Vigon EFM Solvent Cleaner

Zestron Vigon EFM Solvent Cleaner is a high-performance cleaning agent specifically designed for removing flux residues from PCBs and electronic assemblies. This cleaning solution is a halogen-free blend of organic solvents, ideal for both manual and automatic cleaning processes. It is compatible with most polymers and is non-corrosive, ensuring the protection of delicate electronic components during use.

Zestron Vigon EFM Solvent Cleaner is particularly effective at removing resin-based flux residues and dries quickly, leaving no residues behind. Whether applied manually or used in explosion-proof spray-in-air equipment, this flux remover delivers fast, efficient, and thorough results.

• Ideal for the removal of resin-based flux residues
• Non-corrosive
• Fast and residue-free drying
• Easy-to-use for both manual and automatic cleaning
• Suitable as both a cleaning and rinsing product

How to use Zestron Vigon EFM Solvent Cleaner:

1. Zestron Vigon EFM Solvent Cleaner comes with a special brush for spray cleaning of PCBs. Attach the brush to the can and remove the cap.
2. Spray the product onto the PCB.
3. Allow the PCB to soak for 10-30 seconds.
4. Spray and scrub with the brush if necessary.
5. Vigon EFM is also a rinsing agent. Remove the brush and thoroughly spray the PCB to rinse it.
6. Dry the PCB with water- and oil-free compressed air, or allow it to air dry.

Storage

Store Zestron Vigon EFM Solvent Cleaner in the unopened container in a well-ventilated location. Keep away from sunlight and heat. Do not expose to temperatures above 50°C. This product is categorised as HIGHLY FLAMMABLE and must be stored in compliance with relevant regulations.