Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Brand
Loctite
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Loctite SF 7455 SDS
Revision
Version SDS
Download
Manuals
Loctite SF 7455 TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Loctite SF 7455 Cyanoacrylate Activator

Tap to expand
Tap to expand
Loctite SF 7455 Cyanoacrylate Activator
Loctite SF 7455 Cyanoacrylate Activator
From £12.11 Excl VAT £14.53 incl VAT
-
+
Loctite SF 7455 is an activator designed to accelerate the curing speed of cyanoacrylate (instant) adhesives. It is especially suited for post-application use.

Product Information

Loctite SF 7455 is an amine-based activator designed to accelerate the curing speed of cyanoacrylate (instant) adhesives. It is especially suited for post-application use. It can also be pre-applied to the bond area. Use of Loctite SF 7455 is recommended in the presence of dissimilar surfaces (such as metal, glass and ceramics) and close fitting parts. Typical applications include securing wires or coils to PCBs and tamper-proofing adjustable components.Fixture time and cure speed achieved depend on the adhesive used and the substrate bonded. Loctite SF 7455 can affect certain plastics or coatings. It is recommended to check all surfaces for compatibility before use. This product should only be used in a properly ventilated workspace.
  • Increases curing speed on close-fitting parts
  • Especially suited for post-application use
  • Suitable for all substrates

 How to use Loctite SF 7455:

  1. Post-activation use: Apply cyanoacrylate adhesive to the parts to be bonded. Spray or drop Loctite SF 7455 over all the exposed adhesive.
  2. Surface activation: Spray or brush on the activator on both mating surfaces. Cleaning may be required before application on contaminated surfaces.
  3. Allow Loctite SF 7455 time to evaporate under good ventilation. Wait until the surfaces are completely dry.
  4. Apply the adhesive immediately after the activator dries. Do not wait more than 45 seconds. Activator can be re-applied if there is a delay of more than 45 seconds.
  5. Apply the adhesive to one or both surfaces. Assemble parts immediately.
 

Storage

Store Loctite SF 7455 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.This product is categorised as HIGHLY FLAMMABLE and must be stored in compliance with relevant regulations.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

Conro PN: CEL005170
Stock available on 02 December 2024, if ordered today
£12.45 Excl VAT
-
+
Conro PN: CEL005177
Stock available on 07 January 2025, if ordered today
£184.66 Excl VAT
-
+
Conro PN: CEL005166
Stock available on 02 December 2024, if ordered today
£14.25 Excl VAT
-
+
Conro PN: CEL005192
Stock available on 02 December 2024, if ordered today
£14.14 Excl VAT
-
+

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre