Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Brand
Loctite
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Loctite AA 330 SDS
Revision
Version SDS
Download
Manuals
Loctite AA 330 TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Loctite AA 330 Multibond Adhesive

Tap to expand
Tap to expand
Loctite AA 330 Multibond Adhesive
Loctite AA 330 Multibond Adhesive
From £12.34 Excl VAT £14.81 incl VAT
-
+
Loctite AA 330 is a 1-part general purpose adhesive, ideal for bonding disparate substrates like PVC, phenolic and acrylic compounds. It requires an activator to initiate curing.

Product Information

Loctite AA 330 is a high viscosity, urethane methacrylate adhesive. The product is pale yellow and 1-part, requiring no mixing. Loctite AA 330 is a general purpose structural bonder. It is ideal for bonding disparate substrates like PVC, phenolic and acrylic compounds. Loctite AA 330 is suitable for use on metal, wood, ceramic and plastic. Typical applications include tool handles, appliances, sporting goods and decorative trim. Loctite AA 330 cures in combination with an activator, such as Loctite SF 7386 or SF 7387. Substrate used and width of the bondline gap both affect curing speed. Curing will take at least 24 hours before full chemical  resistance is developed. Loctite AA 330 provides good impact resistance and a service temperature range up to 100°C.
  • General purpose
  • High viscosity
  • Good impact and heat resistance
  • Requires an activator to initiate curing
  • Registered to NSF Category P1. This is a regional approval.
 

How to use Loctite AA 330:

  1. Prior to application, contaminated surfaces may need cleaning or degreasing.
  2. Apply a coating of Loctite SF 7386 or SF 7387 activator to one of the bond surfaces.
  3. Apply Loctite AA 330 to the other bond surface. Parts should be assembled within 15 minutes.
  4. Recommended bondline gap is 0.1 mm. If bond gaps are large (up to a maximum of 0.5 mm), or faster cure speed is required, apply activator to both surfaces. Assemble parts within 1 minute.
  5. Clamp bond until the adhesive has fixtured.
  6. Allow product to develop full strength before subjecting to any service loads. This will usually take between 24 and 72 hours.
 

Storage

Store Loctite AA 330 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

Conro PN: CEL005546
Stock available on 30 December 2024, if ordered today
£60.32 Excl VAT
-
+
Conro PN: CEL005548
Stock available on 02 December 2024, if ordered today
£76.44 Excl VAT
-
+
Stock available on 02 December 2024, if ordered today
From £37.37 Excl VAT
Conro PN: CEL001770
Stock available on 02 December 2024, if ordered today
£52.02 Excl VAT
-
+
Stock available on 02 December 2024, if ordered today
From £37.49 Excl VAT

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre