- Home
- Sealants
- Thread Sealants
- Loctite 567 Thread Sealant
Loctite 567 Thread Sealant
Product Information
- Low strength
- High viscosity
- Work temperature ranges from -55°C to 150°C
- Thixotropic to reduce adhesive migration
- Seals instantly against low pressures
- UL approved
How to use Loctite 567:
- For best results, clean all surfaces with a LOCTITE solvent. Allow it to dry.
- If using on inactive metal or curing speed is too slow, use an activator spray such as LOCTITE SF 7471 or SF 7649. Allow it to dry.
- Apply a 360° bead of product to the leading threads of the male fitting. Leave the first thread free. For bigger threads: adjust product amount accordingly. Apply a 360° bead of product on the female threads also.
- Assemble and tighten as required.
- Assemblies will seal instantly to moderate pressures. For maximum strength and solvent resistance, allow the product to cure for 24 hours, minimum.
Storage
Store LOCTITE 567 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.Delivery Information
FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).
International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.
Please refer to our World Wide Delivery page for more information including countries served and delivery options.
Video
Similar Products
You May Be Interested In
Recently Viewed
There are no recently viewed products.