Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Brand
Humiseal
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Humiseal 1080EU SDS
Revision
Version SDS
Download
Manuals
Humiseal 1080EU TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Humiseal 1080EU Stripper for Conformal Coating

Tap to expand
Tap to expand
Humiseal 1080EU Stripper for Conformal Coating
Humiseal 1080EU Stripper for Conformal Coating
From £41.10 Excl VAT £49.32 incl VAT
-
+
HumiSeal Stripper 1080 can be used to remove cured HumiSeal acrylic coatings without negatively affecting printed wiring board substrates or components.

Product Information

HumiSeal Stripper 1080EU contains no ozone depleting chemicals and meets North American air quality regulations. HumiSeal Stripper 1080 is in full compliance with the RoHS Directive 2002/95/EC.

HumiSeal Stripper 1080EU is:

  • compatible with all HumiSeal acrylic coatings.
  • compliant with RoHS directive 2015/863/EU
  • safe for use on printed circuit board assemblies.

Stripper 1080EU has:

  • no ozone depleting chemicals

Directions for Use

  1. immerse the assembly into HumiSeal Stripper 1080
  2. soak for 30-60 minutes
  3. brush loose material from the assembly
  4. clean the assembly with IPA, DI water or other qualified cleaning solution
  5. inspect the assembly to ensure the coating has been completely removed
  6. repeat the steps above if the coating is still on the assembly
  7. bake for a minimum of 30 minutes @ 60 – 65°C after the final cleaning process
The use of heat is not required for use with HumiSeal Stripper 1080. A fully cured acrylic coating of nominal thickness will typically dissolve readily within 30 to 60 minutes upon contact with HumiSeal® Stripper 1080. It is important to thoroughly clean the assembly after the conformal coating removal process. Following the cleaning process, the assembly should be baked to remove residual moisture for a minimum of 30 minutes at 60 – 65°C.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre