Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Brand
Humiseal
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Humiseal 1B73 LED PB25 SDS
Revision
Version SDS
Download
Manuals
Humiseal 1B73 LED PB25 TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Humiseal 1B73 LED PB25 Acrylic Conformal Coating

Tap to expand
Tap to expand
Humiseal 1B73 LED PB25 Acrylic Conformal Coating
Humiseal 1B73 LED PB25 Acrylic Conformal Coating
From £54.35 Excl VAT £65.22 incl VAT
-
+
HumiSeal 1B73 LED PB 25 CPS is a single component, fast drying, acrylic conformal coating intended for use on LED/signage printed circuit assemblies.

Product Information

HumiSeal 1B73 LED PB 25 CPS is characterized by a higher degree of optical clarity and greater resistance to damage by sunlight than standard conformal coatings. HumiSeal 1B73 LED PB 25 CPS demonstrates excellent flexibility and electrical properties. HumiSeal 1B73 LED PB 25 CPS coating is RoHS Directive 2011/65/EU compliant.

Application of HumiSeal 1B73 LED PB 25 CPS

Conformal coatings can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials. Users should perform adequate testing to confirm compatibility between the conformal coating and their particular assembly materials, process conditions and cleanliness level. Please contact HumiSeal for additional information.HumiSeal 1B73 LED PB 25 CPS is specifically diluted to a viscosity for immediate use. No additional dilution is required. HumiSeal Technical Support should be contacted if any further advice on Pre-blends and equipment is required.

Dipping

A controlled rate of immersion and withdrawal (5-15 cm/min) will further ensure even deposition of the coating and ultimately a uniform film. During the application, evaporation of solvent causes an increase in viscosity that should be adjusted by adding small amounts of HumiSeal Thinner 73. Viscosity in the dip tank should be checked regularly, using a simple measuring device such as a Zahn or Ford viscosity cup.

Spraying

HumiSeal 1B73 LED PB 25 CPS can be sprayed using conventional spraying equipment. Spraying should be done in an environment with adequate ventilation so that the vapour and mist are carried away from the operator. The specific Pre-Blend and spray pressure will depend on the specific type of spray equipment used and operator technique.

Brushing

HumiSeal 1B73 LED PB 25 CPS may be brushed onto surfaces. Uniformity of the film depends on specific preblend chosen and operator's technique.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

Conro PN: CEL001189
16 In StockAdditional stock available on 26 November 2024, if ordered today
£225.92 Excl VAT
-
+
Conro PN: CEL007093
Stock available on 12 December 2024, if ordered today
£587.11 Excl VAT
-
+
Conro PN: CEL005942
Stock available on 26 November 2024, if ordered today
£37.83 Excl VAT
-
+
Conro PN: CEL001172
76 In StockAdditional stock available on 26 November 2024, if ordered today
£52.89 Excl VAT
-
+

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre