Skip to main content
Close

Your Basket

Your basket is empty. Continue shopping to add products to your basket.

Call Centre

Properties

Specifications
Colour
Clear
Brand
Loctite
Packed With Dry Ice
no

Downloads

Manuals
Revision
Download
Manuals
Loctite EA 9483 SDS
Revision
Version SDS
Download
Manuals
Loctite EA 9483 TDS
Revision
Version TDS
Download

ConRo Electronics Ltd cannot ensure and do not guarantee that the information in these documents is the most current available from the manufacturer. There are instances when updates are released without our immediate knowledge.

Loctite EA 9483 Epoxy Adhesive

Tap to expand
Tap to expand
Loctite EA 9483 Epoxy Adhesive
Loctite EA 9483 Epoxy Adhesive
From £20.24 Excl VAT £24.29 incl VAT
-
+
Loctite EA 9483 is a 2-part, ultra-clear epoxy adhesive designed for applications requiring transparency and high strength.

Product Information

Loctite EA 9483 is a 2-part, ultra-clear epoxy adhesive. It uses amine as a hardener and is designed for applications requiring transparency and high strength. Typical uses include decorative panels and displays. Loctite EA 9483 can tolerate a wide range of temperatures without shrinking or cracking. It also provides low moisture absorption and good resistance to solvents and chemicals. Loctite EA 9483 cures at room temperature after mixing. It has an average fixturing time of 3.5 hours at room temperature. High temperatures can accelerate the curing process. Loctite EA 9483 achieves complete cure within 3 days at room temperature. Fully cured product provides superior strength and impact resistance.
  • High strength
  • Flowable
  • Ultra clear adhesive bondline
  • Minimal shrinkage
 

How to use Loctite EA 9483:

  1. For best results, clean all surfaces with a Loctite solvent. Use Loctite SF 7063. For high strength structural bonds, special surface treatments can increase bond strength and durability.
  2. Dual cartridges: Insert cartridges in the application gun. Start the plunger into the cylinders. Remove cartridge cap, expel and discard a small amount of adhesive.
  3. For automatic mixing of resin and hardener, attach mixing nozzle at the end of the cartridge. Begin dispensing the adhesive.
  4. For hand mixing, expel the desired amount of adhesive and mix thoroughly. Continue mixing for 15 seconds after the product assumes a uniform colour.
  5. Bulk containers: Mix thoroughly in the proportions specified in the technical datasheet.
  6. Apply the adhesive to one surface to be bonded. For maximum strength, apply evenly to both surfaces. Apply as quickly as possible and assemble parts immediately.
  7. Keep the assembled parts from moving during cure. Allow bond to develop full strength before subjecting to any service loads.
 

Storage

Store Loctite EA 9483 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.

Video

No video available.

Similar Products

Stock available on 21 January 2025, if ordered today
From £17.36 Excl VAT
Stock available on 02 December 2024, if ordered today
From £20.27 Excl VAT
Stock available on 02 December 2024, if ordered today
From £19.40 Excl VAT
Conro PN: CEL001756
5 In StockAdditional stock available on 21 January 2025, if ordered today
£25.38 Excl VAT
-
+
Conro PN: CEL005519
7 In StockAdditional stock available on 02 December 2024, if ordered today
£18.19 Excl VAT
-
+

You May Be Interested In

Recently Viewed

There are no recently viewed products.

Call Centre