- Home
- Adhesives
- Structural Adhesives
- Loctite AA 330 Multibond Adhesive
Loctite AA 330 Multibond Adhesive
Product Information
- General purpose
- High viscosity
- Good impact and heat resistance
- Requires an activator to initiate curing
- Registered to NSF Category P1. This is a regional approval.
How to use Loctite AA 330:
- Prior to application, contaminated surfaces may need cleaning or degreasing.
- Apply a coating of Loctite SF 7386 or SF 7387 activator to one of the bond surfaces.
- Apply Loctite AA 330 to the other bond surface. Parts should be assembled within 15 minutes.
- Recommended bondline gap is 0.1 mm. If bond gaps are large (up to a maximum of 0.5 mm), or faster cure speed is required, apply activator to both surfaces. Assemble parts within 1 minute.
- Clamp bond until the adhesive has fixtured.
- Allow product to develop full strength before subjecting to any service loads. This will usually take between 24 and 72 hours.
Storage
Store Loctite AA 330 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.Delivery Information
FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).
International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.
Please refer to our World Wide Delivery page for more information including countries served and delivery options.
Video
No video available.
Similar Products
You May Be Interested In
Recently Viewed
There are no recently viewed products.