Loctite 638 Retaining Compound

Add To Wishlist

LOCTITE 638 is a high strength retaining compound designed for the bonding of cylindrical fitting parts.

+ More Details

From £10.04 Excl VAT £12.05 incl VAT

LOCTITE 638 is a high strength retaining compound designed for the bonding of cylindrical fitting parts.

+ More Details

Datasheets Properties Video DELIVERY

Product Information

LOCTITE 638 is a high strength retaining compound. It is designed for the bonding of cylindrical fitting parts. The product is especially suited for use on narrow bond gaps, approaching 0.25 mm. It cures at room temperature when confined between close-fitting metal surfaces. The curing process occurs in the absence of air.LOCTITE 638 prevents loosening and leakage caused by shock and vibration. It works on active metals and passive substrates (e.g. stainless steel) alike. The product offers high-temperature performance and good oil tolerance. It also withstands minor surface contaminants. Typical applications include locking bushings and sleeves into housings and on shafts.

High temperature resistance
Tolerates minor contaminants, including industrial oils
Provides good strength on all metals, including passive substrates
Ideal for shafts, gears, pulleys and similar cylindrical parts
P1 NSF Reg. No.: 123010
DVGW Approval (EN 751-1): NG-5146AR0619
WRAS Approval (BS 6920): 0511518

How to use Loctite 638:

For best results, clean surfaces with a LOCTITE® solvent. Allow it to dry.
If using on inactive metal or curing speed is too slow, use an activator spray such as LOCTITE SF 7471 or SF 7649. Allow it to dry.
For slip fitted assemblies. Apply adhesive around the leading edge of the pin and the inside of the collar. Use a rotating motion during assembly to ensure good coverage.
For press fitted assemblies. Apply adhesive thoroughly to both bond surfaces. Assemble at high press on rates.
For shrink fitted assemblies. Apply adhesive onto the pin. Heat collar to create sufficient clearance for free assembly. Hold together or clamp bonds until the adhesive has fixtured.
Allow LOCTITE® 638 to develop full strength before subjecting to any service loads. This will usually take about 24 hours.

Storage

Store LOCTITE 638 in the unopened container in a dry location. Optimal Storage: 8° C to 21° C. Storage below 8° C or greater than 28° C can adversely affect product properties.

Delivery Information

FREE UK Mainland delivery for orders over £100.00 (orders placed through the office will incur delivery charges).

International delivery is available to over 100 countries worldwide. Shipping is automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection should they prefer.

Please refer to our World Wide Delivery page for more information including countries served and delivery options.